Hyundai Tucson (NX4) 2022-2026 Service Manual / Heating, Ventilation and Air Conditioning
Hyundai Tucson: Heating, Ventilation and Air Conditioning
- Troubleshooting
- Specifications
- Special Service Tools
- Air Conditioning System
- Description and Operation
- General Safety Information and Caution
- Components and Components Location
- Repair procedures
- Compressor oil
- Refrigerant Line
- Compressor
- Condenser
- Receiver-Drier
- A/C Pressure Transducer
- Evaporator Temperature Sensor
- In-car Sensor
- Photo Sensor
- Ambient Sensor
- Auto defoging sensor
- PM Sensor
- Heater
- Heater Unit
- Heater Core
- Evaporator Core
- PTC Heater
- Temperature Control Actuator
- Mode Control Actuator
- Auto Defoging Actuator
- Blower
- Blower Unit
- Blower Motor
- Blower Resistor (Manual)
- Power Mosfet (Dual)
- Climate Control Air Filtar
- Intake Actuator
- Controller
Troubleshooting
- Troubleshooting
Problem Symptoms Table
Before replacing or repairing air conditioning components, first
determine if the malfunction is due to the refrigerant charge, air flow
or compressor ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Oil Temperature Sensor (OTS)
- Description
Continuous Variable Valve Timing (CVVT) system advances or retards the
valve timing of the intake and exhaust valve in accordance with the ECM
control signal which is calculated by the engine speed and load.By
controlling CVVT, the valve over-lap or under-lap occurs, which mak ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Roof Side Molding
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
1.Using a screwdriver or remover, remove the roof side molding (A).
2.To install, ...
© 2023-2026 Copyright www.htucson4.com
