Hyundai Tucson: Heating, Ventilation and Air Conditioning / Controller
Intake Actuator
- Description
The intake actuator is located at the blower unit. It regulates the
intake door by a signal from the control unit. Pressing the intake
selection switch will shift between recircul ...
Heater & A/C Control Unit (Manual)
- Component
Connector Pin Function
Pin NoConnector A (Blower)Connector B (Main)
1LowBattery (+)
2CommonISG B+
3GroundILL+ (TAIL)
4Middle LowSensor REF (+5V)
5Middle HighMode control actua ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Components and Components Location
- Components
1. RH water jacket insert2. LH water jacket insert3. Cylinder block4. O-ring5. Piston cooling oil jet6. Crankshaft upper bearing (No. 1, 5 journal)7. Thrust bearing8. Crankshaft upper bearing (No. 2, 3, 4 journal)9. Crankshaft10. Crankshaft position sensor wheel11. Crankshaft lowe ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: PTG Spindle
- Removal
1.Disconnect the negative (-) battery terminal.
2.Remove the rear pillar trim.(Refer to Body (Interior and Exterior) - Interior Trim - Rear Pillar Trim)
3.Disconnect the PTG spindle connector (A).
4.Using a flat-tip screwdriver, remove the mounting clip (A).
5.Remove the spind ...
