Hyundai Tucson: Heater / Heater Core
1.Disconnect the negative (-) battery terminal.
2.Remove the heater and blower assembly.(Refer to Heater - "Heater Unit")
3.Loosen the mounting screws and remove the heater core cover (A).
4.Separate the heater core (A) from the heater unit.
5.Install in the reverse order of removal.
• Refill the cooling system with engine coolant.
• Do not interchange the inlet and outlet heater hoses and install the hose clamps securely.
• Make sure that there is no air leakage.
• Charge the system and test its performance.
Heater Unit
- Component Location
1. Heater unit assembly
- Components
1. Heater unit assembly2. Heater core cover3. Heater core assembly4. Mode control actuator [LH]5. DEF duct seal6. Evaporator a ...
Evaporator Core
- Replacement
1.Disconnect the negative (-) battery terminal.
2.Remove the heater core.(Refer to Heater - "Heater Core")
3.Loosen the mounting screws and remove the evaporator core cover (A).
...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Propeller Shaft Assembly. Propeller Shaft
Propeller Shaft
- Components
1. Front propeller shaft2. Center bearing bracket3. Rear propeller shaft
- Removal
• When lifting a vehicle using a lift, be careful not to damage
the lower parts of the vehicle (floor under cover, fuel filter, fuel
tank, canister ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Active Air Flap
- Description
The AAF (Active Air Flap) is located between radiator grille and
radiator.The AAF controls the motor properly and then the air flaps
adjust air flow from the radiator grille.During high speed driving, it
will reduce the air resistance by closing the air flaps. This improves
...
