Hyundai Tucson: Restraint
- Description and Operation
- General Safety Information and Caution
- Specifications
- Special Service Tools
- General Information
- SRSCM
- Components and Components Location
- SRS Control Module (SRSCM)
- Front Impact Sensor (FIS)
- Side Impact Sensor (SIS)
- Airbag Module
- Driver Airbag (DAB) Module and Clock Spring
- Passenger Airbag (PAB) Module
- Side Airbag (SAB) Module
- Curtain Airbag (CAB) Module
- Center Side Air Bag Module(CSAB)
- Airbag Module Disposal
- Seat Belt Pretensioner. Seat Belt Pretensioner (BPT)
Steering Gear Box
- Components
1. Steering gera box2 Tie rod end
- Removal and installation
• When lifting a vehicle using a lift, be careful not to damage
the lower parts of the ve ...
Description and Operation
- Warning Lamp Activation
Warning Lamp Behavior after Ignition On
As soon as the operating voltage is applied to the SRSCM ignition input,
the SRSCM activates the warning lamp for a LED lamp che ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Idle Stop and Go (ISG) System
Idle Stop and Go helps reduce fuel
consumption by automatically shutting
down the engine, when the vehicle is at
a standstill (i.e. red stop light, stop sign,
and traffic jam).
ISG system is always active, when the
engine is running.
Information
When the engine is automatically started ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Passenger Airbag (PAB) Module
- Description
The passenger airbag (PAB) is installed inside the crash pad and
protects the front passenger in the event of a frontal crash. The SRSCM
determines if and when to deploy the PAB.
• Never attempt to measure the circuit resistance of the airbag
module (squib ...
