Hyundai Tucson: Restraint / Specifications
| Item | N.m | kgf.m | lb-ft |
| Passenger airbag (PAB) bolt | 3.9 - 5.9 | 0.4 - 0.6 | 2.9 - 4.4 |
| Curtain airbag (CAB) bolt | 7.8 - 11.8 | 0.8 - 1.2 | 5.8 - 8.7 |
| Curtain airbag (CAB) nut | 3.9 - 5.9 | 0.4 - 0.6 | 2.9 - 4.4 |
| Side airbag (SAB) nut | 5.9 - 7.8 | 0.6 - 0.8 | 4.3 - 5.8 |
| Seat belt retractor & Pretensioner | 39.2 - 53.9 | 4.0 - 5.5 | 28.9 - 39.7 |
| SRS control module (SRSCM) bolt | 10.8 - 13.7 | 1.1 - 1.4 | 8.0 - 10.1 |
| SRS control module (SRSCM) nut | 7.8 - 9.8 | 0.8 - 1.0 | 5.8 - 7.2 |
| Front impact sensor (FIS) bolt | 10.8 - 12.7 | 1.1 - 1.3 | 8.0 - 9.4 |
| Gravity rear impact sensor (R-SIS) bolt | 10.8 - 12.7 | 1.1 - 1.3 | 8.0 - 9.4 |
| Gravity side impact sensor (G-SIS) bolt | 10.8 - 12.7 | 1.1 - 1.3 | 8.0 - 9.4 |
General Safety Information and Caution
- Precautions
General Precautions
Please read the following precautions carefully before performing the
airbag system service. Observe the instructions described in this
manual, or the airbags ...
Special Service Tools
- Special Service Tools
Tool (Number and Name)IllustrationUse
Deployment tool0957A-34100A
Airbag deployment tool.Use with (0957A-AL140, 0957A-AL160)
Dummy0957A-38200
Simulator to check the resist ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Lumber Support System
- Removal
1.Disconnect the negative (-) battery terminal.
2.Remove the front seat back cover.(Refer to Body - "Front Seat Back Cover")
3.Disconnect motor connecotor (A).
4.Remove the front side airbag (A).
5.Remove the lumber support cable bracket after loosening mounting screws.
6.R ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Mic
- Inspection
1.Disconnect the negative (-) battery terminal.
2.Remove the overhead console.(Body Electrical System - "Overhead Console Lamp")
3.Check for continuity between terminal No. 1 and No. 2. If there is no continuity, replace the mic.
- Removal
1.Disconnect the negative (-) ...
