Hyundai Tucson: Emergency Situations
- Hazard Warning Flasher
- In Case of an Emergency While Driving
- If the Engine Will Not Start
- Jump Starting
- If the Engine Overheats
- Tire Pressure Monitoring System (TPMS)
- Check Tire Pressure
- Tire Pressure Monitoring System
- Low Tire Pressure Position and Tire Pressure Telltale
- TPMS Malfunction Indicator
- Changing a Tire with TPMS
- If You Have a Flat Tire
- Towing
Ultrasonic sensors
Front ultrasonic sensors
These ultrasonic sensors are mounted to
the bumper outside your vehicle.
Front side ultrasonic sensors
These ultrasonic sensors are mounted
near the front wheels ou ...
Hazard Warning Flasher
The hazard warning flashers warn other
drivers to exercise extreme caution when
approaching, overtaking, or passing your
vehicle.
It should be used whenever making
emergency repairs or when ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Joint Assembly (Wheel side)
- Removal
The type can replace the wheel side joint boot
1.Remove the front drive shaft.(Refer to Driveshaft Assembly - "Front Driveshaft")
2.Remove the trans axle side joint.(Refer to Driveshaft Assembly - "Transaxle Joint")
3.Remove the dynamic damper.(Refer to Driveshaft Assembly - "Dynam ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Front Impact Sensor (FIS)
- Description
• The front impact sensors (FIS) are installed on the upper of the
side panel in Front End Module (FEM). They are remote sensors that
detect acceleration due to a collision at their mounting locations.
• The primary purpose of the Front Impact Sensor (FIS) is to
provid ...
