Hyundai Tucson Owners & Service Manuals

Hyundai Tucson: Driver Assistance System Sensors / Ultrasonic sensors

Front ultrasonic sensors

These ultrasonic sensors are mounted to the bumper outside your vehicle.

Front side ultrasonic sensors

These ultrasonic sensors are mounted near the front wheels outside your vehicle.

Rear side ultrasonic sensors

These ultrasonic sensors are mounted near the rear wheels outside your vehicle.

Rear ultrasonic sensors

These ultrasonic sensors are mounted to the bumper outside your vehicle.

WARNING

To prevent serious injury or death:

  • Always keep the ultrasonic sensors clean.
  • Do not spray the ultrasonic sensors or the surrounding area directly with high pressure water.
  • Do not apply objects such as bumper sticker or bumper guard, near the ultrasonic sensors or never apply paint to the bumper or other locations.
  • Never disassemble or strike the ultrasonic sensors components.
  • Do not modify the vehicle bumper height or ultrasonic sensor installations. Any non-factory installed equipment or accessories may also interfere with the sensor performance.
  • If the ultrasonic sensors have been forcibly moved out of proper alignment or are damaged, have the vehicle inspected by an authorized HYUNDAI dealer.
    Radars
    Front radar The front radar is mounted behind the front grill. Rear corner radar The rear corner radars are mounted near the rear corners of your vehicle above the bumper. WARNING To pr ...

    Emergency Situations
    ...

    Other information:

    Hyundai Tucson (NX4) 2022-2025 Service Manual: Components and Components Location
    - Component Location 1. Head lamp (Low & High)2. Head lamp (Low)3. Head lamp (High)4. Turn signal lamp5. Daytime running light (DRL) & Positioning lamp6. Side repeater lamp7. Overhead console lamp8. Vanity lamp9. Rear personal lamp10. Luggage lamp11. Head lamp (Static Bending Light)12. ...

    Hyundai Tucson (NX4) 2022-2025 Service Manual: Surround View Monitor (SVM) Unit
    - Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the crash pad center panel.(Refer to Body - "Crash Pad Center Panel") 3.Disconnect the SVM unit connector (A). 4.Loosen the mounting nuts and remove the SVM Unit (A). - Installation 1.Install the SVM unit. 2.Install ...

    В© 2023-2025 Copyright www.htucson4.com