Hyundai Tucson: Emergency Situations / If the Engine Will Not Start
- • Be sure to shift the gear to N (Neutral) or P (Park). The engine starts only when the gear is in N (Neutral) or P (Park).
- • Turn on the interior light. If the light dims or goes out when you operate the starter, the battery is drained. Refer to the instructions in “Jump Starting” provided in this chapter.
- • Check the fuel level and add fuel if necessary.
If the vehicle still does not start, contact an authorized HYUNDAI dealer for assistance.
NOTICE
Starting the vehicle by pushing or pulling may cause the catalytic converter to overload and damage the emission control system.
In Case of an Emergency While Driving
If the Engine Stalls While Driving
• Reduce the speed gradually, keeping
a straight line. Move cautiously off the
road to a safe place.
• Turn on your hazard warning flasher.
• Try ...
Jump Starting
Jump starting can be dangerous if done
incorrectly. Follow the jump starting
procedure in this section to avoid serious
injury or damage to your vehicle. If in
doubt about how to properly jump ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Parking Distance Warning
Malfunction and Limitations
Parking Distance Warning
malfunction
After starting the engine, a beep sounds
when the gear is shifted to R (Reverse)
to indicate Parking Distance Warning is
operating normally.
If one or more of the following occurs,
check whether the ultrasonic sensor is
damaged or blocked.
The a ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Integrated Thermal Management Module (ITM)
- Components
1. Integrated Thermal management Module (ITM)
1. Water inlet pipe2. O-ring
- Description
The Integrated Thermal management Module (ITM) is a device that
controls the coolant flow rate according to coolant temperature. At
initial startup, the ITM quickly warms up th ...
