Hyundai Tucson: If You Have a Flat Tire / Jack and Tools
.png)
1 Jack handle
2 Jack
3 Wheel nut wrench
The jack and wheel lug wrench are stored in the luggage compartment under the luggage box cover.
The jack is provided for emergency tire changing only.
.png)
Turn the winged hold down bolt counterclockwise to remove the spare tire.
Store the spare tire in the same compartment by turning the winged hold down bolt clockwise.
To prevent the spare tire and tools from "rattling", store them in their proper locations.
.png)
If it is hard to loosen the tire hold down wing bolt by hand, you can loosen it easily using the jack handle.
1. Put the jack handle 1 inside of the tire hold-down wing bolt.
2. Turn the tire hold-down wing bolt counterclockwise with the jack handle.
If You Have a Flat Tire
WARNING
Follow the instructions in this section
when replacing a tire to reduce the risk
of serious injury or death. Changing a tire
can be dangerous. ...
Jack Label
The actual jack label in the vehicle may differ from the illustration.
For more detailed specifications, refer to the label attached to the jack.
1. Model Name
2. Maximum allowable load
3. Alw ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Intake Actuator
- Description
The intake actuator is located at the blower unit. It regulates the
intake door by a signal from the control unit. Pressing the intake
selection switch will shift between recirculation and fresh air modes.
- Components
1. Intake actuator
- Inspection
1.Turn the i ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Lumber Support System
- Removal
1.Disconnect the negative (-) battery terminal.
2.Remove the front seat back cover.(Refer to Body - "Front Seat Back Cover")
3.Disconnect motor connecotor (A).
4.Remove the front side airbag (A).
5.Remove the lumber support cable bracket after loosening mounting screws.
6.R ...
