Hyundai Tucson: Manual Heating and Air Conditioning / OFF
If you press the multi air button again, the indicator turns OFF and the directed air flow is adjusted according to the previous setting before the multi air mode was enabled.
If you press the MODE selection button, the airflow changes based on the MODE selected.
Multi air mode
When the multi air mode button is
pressed, air flow is directed to the facelevel
and floor-level through the air vents
along the instrument panel for the driver
and passenger. The multi-ai ...
System Operation
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the
outside (fresh) air position.
3. Set the temperature control to the
desired position.
4. Set the fan speed co ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: ATF Warmer
- Description
• The ATF warmer is mounted on the valve body cover to reduce oil
viscosity friction by increasing oil temperature under cold condition,
which in turn improves fuel efficiency. It is serial mounted on the
entry of the Electronic Throttle Controller (ETC), as shown in the
...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Main Crash Pad Assembly
- Component Location
1. Main crash pad assembly
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
• T ...
