Hyundai Tucson: Manual Heating and Air Conditioning / Multi air mode
.png)
.png)
When the multi air mode button is pressed, air flow is directed to the facelevel and floor-level through the air vents along the instrument panel for the driver and passenger. The multi-air mode LED indicator illuminates. If the multi air mode button is pressed when the air volume is beyond level 4, it decreases to level 3.
Fan speed control
Press the button to increase fan
speed and airflow. Press the button
to
decrease fan speed and airflow.
Pressing the OFF button turns off the fan.
Information
Operating the fan speed when ...
OFF
If you press the multi air button again,
the indicator turns OFF and the directed
air flow is adjusted according to the
previous setting before the multi air
mode was enabled.
If you press th ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Door Scuff Trim
- Component Location
1. Front door scuff trim2. Rear door scuff trim
- Replacement
[Front door scuff trim]
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prev ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Filler-Neck Assembly
- Removal
• Be careful not to damage the parts located under the vehicle
(floor under cover, canister, fuel tank) when raising the vehicle using
the lift.(Refer to General Information - "Lift and Support Points")
1.Turn the ignition switch OFF and disconnect the batter ...
