Hyundai Tucson: Manual Heating and Air Conditioning / Fan speed control
.png)
Press the .png)
button to increase fan
speed and airflow. Press the button
to
decrease fan speed and airflow.
Pressing the OFF button turns off the fan.
Information
Operating the fan speed when the ignition switch is in the ON position may cause the battery to discharge.
Air conditioning
.png)
Press the A/C button to turn on the air conditioning system (indicator light ON). Press the button again to turn off the air conditioning system.
OFF mode
.png)
Press the OFF button to turn off the climate control system .
You can still operate the mode buttons and air intake buttons as long as the ignition switch is in the ON position.
Air intake control
To select outside (fresh) air or
recirculated air, press this button.
Recirculated air position
With the recirculated air
selected, air from the
passenger compartment is
drawn through the ...
Multi air mode
When the multi air mode button is
pressed, air flow is directed to the facelevel
and floor-level through the air vents
along the instrument panel for the driver
and passenger. The multi-ai ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Drive Belt Tensioner
- Removal and Installation
• Be careful not to damage the parts located under the vehicle
(floor under cover, fuel filter, fuel tank and canister) when raising
the vehicle using the lift.(Refer to General Information - "Lift and
Support Points")
Drive Belt Tensioner
...
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Cluster Display Message
(Button type)
Information
The actual message may differ from
the following cluster display message.
The following messages may differ
depending on the vehicle model.
Shifting conditions not met. Reduce
speed, then shift
This message appears when the engine
RPM is too high or when driving too f ...
