Hyundai Tucson: Interior Features / USB Charger
.png)
The USB charger is designed to recharge batteries of small size electrical devices using a USB cable.
The electrical devices can be recharged when the ignition switch is in the ACC or ON (or START) position.
The USB charger is designed to recharge batteries of small size electrical devices using a USB cable.
The electrical devices can be recharged when the ignition switch is in the ACC or ON (or START) position.
The battery charging state may be monitored on the electrical device. Disconnect the USB cable from the USB port after use.
- A smartphone or a tablet PC that does not use a USB cable to charge should be charged using its own charger.
- Do not attempt to use the charging terminal to turn ON an audio or to play media with the infotainment system.
Power Outlet
The power outlet is designed to provide
power for mobile phones or other
devices designed to operate with vehicle
electrical systems. The devices should
draw less than 180 watts with the eng ...
Wireless Smartphone Charging
System
A : Indicator light, B : Charging pad
Charging your smartphone
The wireless smartphone charging
system charges only Qi-enabled
smartphones (). Visit your
smartphone
manufacturer’s webs ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Repair procedures
- Adjustment
Glass Adjustment
• Check the glass run channel for damage or deterioration, and replace it if necessary.
1.Remove the rear door trim.(Refer to Rear Door - "Rear Door Trim")
2.Remove the plug hole(A).
3.Lower the glass by operating the power window switc ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Knock Sensor (KS)
- Description
Knocking is a phenomenon characterized by undesirable vibration and
noise and can cause engine damage. Knock Sensor (KS) is installed on the
cylinder block and senses engine knocking.When knocking occurs, the
vibration from the cylinder block is applied as pressure to the
pi ...
