Safe Exit Warning malfunction
.png)
When the Safe Exit Warning is not
working properly, the "Check Blind-Spot
Safety system" warning message may
appear, and the
warning light may
illuminate on the instrument cluster.
Have the vehicle inspected by an
authorized HYUNDAI dealer.
.png)
When the side view mirror warning
light is not working properly, the
"Check side view mirror warning light"
warning message may appear, and the
warning
light may illuminate on the
instrument cluster. Have the vehicle
inspected by an authorized HYUNDAI
dealer.
Safe Exit Warning disabled
.png)
If the rear corner radar is blocked or covered, or when the rear bumper around the rear corner radar or sensor is covered by any foreign material, such as snow, rain, or dirt, or when a trailer or hitch mounted carrier is installed, the detecting performance may decrease and temporarily limit or disable Safe Exit Warning.
The "Blind-Spot Safety system disabled. Radar blocked" warning message may appear on the instrument cluster.
The function operates normally when such foreign material, trailer, or carrier is removed, and the engine is restarted.
If the function does not operate normally after anything covering or blocking the sensors is removed, have the vehicle inspected by an authorized HYUNDAI dealer.
WARNING
Limitations of Safe Exit Warning
Safe Exit Warning may not operate normally, or may operate unexpectedly if:
Information
For more information on the limitations on the rear corner radar, refer to the "Blind-Spot Collision Warning (BCW)" or "Blind-Spot Collision-Avoidance Assist (BCA)" section in this chapter.
WARNING
Safe Exit Warning Operation
Manual Speed Limit Assist (MSLA). Manual Speed Limit Assist
OperationHyundai Tucson (NX4) 2022-2026 Service Manual: Front Lower Arm G Bushing
- Replacement
Steel lower arm
• Replace the lower arm G bushing if it only has a crack, noise
from bushing without cracks can be improved by applying silicone oil.
1.Replace the lower arm G bushing by using the SST (09545-AL100).
• Refer to th ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: MDPS PowerPack Assembly
- Replacement
1.Turn the steering wheel so that the front wheels are placed in the straight ahead position.
2.Turn the ignition switch OFF and disconnect the battery negative (-) cable.
3.Remove the driver airbag (DAB).(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
4.R ...