Hyundai Tucson: Driver Assistance System / Safe Exit Warning(Sew)
.png)
Safe Exit Warning uses the rear corner radars to help detect a vehicle approaching the rear of your vehicle, after the vehicle is stopped and a passenger opens a door.
If Safe Exit Warning is activated, an audible warning sounds and a warning message may appear on the instrument cluster.
The warning timing may differ depending on the speed of the detected vehicle.
Information
Refer to the "Driver Assistance Sensors" section in this chapter for the location and the general precautions of rear corner radar.
Blind-Spot Collision-Avoidance
Assist Malfunction and
Limitations
Blind-Spot Collision-Avoidance
Assist malfunction
When the Blind-Spot Collision-Avoidance
Assist is not working properly, the
"Check Blind-Spot Safety system"
warning message may appear, an ...
Safe Exit Warning Settings
Safety Exit Warning
With the ignition switch ON, go to User
Settings > Driver Assistance > Blind-
Spot Safety > Safe Exit Assist (for
cluster type) or Setup > Vehicle > Driver ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Side Impact Sensor (SIS)
- Description
1.The Side Impact Sensor (SIS) system consists of two kinds of side
impact sensor which are installed at each center of the front door
module (left and right) and two rear sensors which are installed in the
rear pillar (left and right). • The Front Side Impact Sensor is also ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: UD Clutch Control Solenoid Valve (UD/C_VFS)
- Description
• UD Clutch control solenoid valve is a Variable Force Solenoid (VFS) type.
• When TCM supplies variable current to solenoid valve, hydraulic
pressure of UD clutch is controlled directly by solenoid valve.
- Components Location
1. 28 Brake control solenoid valve ...
