.png)
1 Manual Speed Limit Assist indicator
light
2 Set speed
Manual Speed Limit Assist allows you to set a self-imposed maximum speed limit. If you drive over the set speed, Manual Speed Limit Assist blinks and chimes until your vehicle speed decreases below the set speed.
To set speed limit
.png)
1. Press and hold the Driving Assist
(
) button at the desired speed.
The Manual Speed Limit Assist
(
) indicator light illuminates on
the instrument cluster.
.png)
.png)
2. Push the + switch up or - switch down to change the set speed.
Push and hold to increase or decrease to the nearest multiple of five (multiple of ten in km/h), and then increase or decrease by 5 mph (10 km/h).
.png)
3. Check the set speed limit on the instrument cluster.
If you want to drive over the set speed, depress the accelerator pedal far enough to activate the kickdown mechanism.
The set speed limit blinks and chime sounds until your vehicle speed decreases below the set speed limit.
Information
To temporarily cancel Manual Speed Limit Assist
.png)
Press the
button to temporarily
cancel the set speed limit. The set speed
turns off, but the Manual Speed Limit
Assist (
) indicator light stays on.
To resume Manual Speed Limit Assist
.png)
.png)
Push the +/- switch or
button.
If you push the + switch up or – switch down, the set speed is set to the current speed.
If you press the
button, the set
speed resumes to the previously set
speed limit.
To turn off Manual Speed Limit Assist
.png)
Press the Driving Assist (
)
button to
turn off Manual Speed Limit Assist off.
The Manual Speed Limit Assist (
)
indicator light turns off.
Always press the Driving Assist (
)
button to turn off Manual Speed Limit
Assist when not in use.
WARNING
To prevent serious injury or death:
) indicator light is
off.
Safe Exit Warning Malfunction
and LimitationsHyundai Tucson (NX4) 2022-2025 Service Manual: Side Airbag (SAB) Module
- Description
The Side Airbags (SAB) are installed inside the front seat and protects
the driver and passenger from danger when side crash occurs. The SRSCM
determines deployment of side airbag by using Side Impact Sensor (SIS)
signal.
• Never attempt to measure the cir ...
Hyundai Tucson (NX4) 2022-2025 Service Manual: Crankshaft Position Sensor (CKPS)
- Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and
is one of the most important sensors of the engine control system. If
there is no CKPS signal input, fuel is not supplied.That is, vehicle
can't run without CKPS signal. This sensor is installed on the cylin ...