Hyundai Tucson: Driver Assistance System / Rear Cross-Traffic Collision Warning (RCCW)
Rear Cross-Traffic Collision Warning uses the rear corner radars to help detect vehicles approaching from the left or right while your vehicle is reversing, and to warn you that a collision is imminent with a warning message and an audible warning.
.png)
A: Rear Cross-Traffic Collision Warning operating range
The warning timing may differ depending on the speed of the detected vehicle.
Information
Refer to the "Driver Assistance Sensors" section in this chapter for the location and the general precautions of rear corner radar.
- Rear Cross-Traffic Collision Warning Settings
- Rear Cross-Traffic Collision Warning Operation
- Rear Cross-Traffic Collision Warning Malfunction and Limitations
Surround View Monitor
Malfunction and Limitations
Surround View Monitor malfunction
When Surround View Monitor is not
working properly, or the screen flickers,
or the camera image does not display
normally, have the vehicle inspected by
an a ...
Rear Cross-Traffic Collision
Warning Settings
Rear Cross-Traffic Safety
With the ignition switch ON, go to User
Settings > Driver Assistance > Parking
Safety > Rear Cross-Traffic Safety (for
cluster type) or Setup > Vehicle & ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Electronic Parking Brake
(EPB) warning light. AUTO HOLD indicator light
Electronic Parking Brake
(EPB) warning light
This warning light illuminates:
When the ignition switch is in the
ON position. The EPB warning light
illuminates for about 3 seconds and
then goes off.
Whenever there is a malfunction with
EPB.
If the EPB warning light remains
...
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Smart Cruise Control conditions not
met
If the Driving Assist button, the +/-
switch, or the
button is pushed
when Smart Cruise Control’s operating
conditions are not met, the "Smart Cruise
Control conditions not met" message
appears on the instrument cluster, and
an audible warning sounds.
In traffic situation
In tr ...
