Rear Cross-Traffic Collision Warning malfunction
When the Rear Cross-Traffic Collision
Warning is not working properly, the
"Check Rear Cross-Traffic Safety system"
warning message may appear, and the
warning
light may illuminate on the
instrument cluster. Have the vehicle
inspected by an authorized HYUNDAI
dealer.
When the side view mirror warning
light is not working properly, the
"Check side view mirror warning light"
warning message may appear, and the
warning
light may illuminate on the
instrument cluster. Have the vehicle
inspected by an authorized HYUNDAI
dealer.
Rear Cross-Traffic Collision Warning disabled
If the rear corner radar is blocked or covered, or when the rear bumper around the rear corner radar or sensor is covered by any foreign material, such as snow, rain, or dirt, or when a trailer or hitch mounted carrier is installed, the detecting performance may reduce and temporarily limit or disable Rear Cross- Traffic Collision Warning.
The " Rear Cross-Traffic Safety system disabled. Radar blocked" warning message may appear on the instrument cluster.
The function operates normally when such foreign material, trailer, or carrier is removed, and the engine is restarted.
If the function does not operate normally after anything covering or blocking the sensors is removed, have the vehicle inspected by an authorized HYUNDAI dealer.
WARNING
Limitations of Rear Cross-Traffic Collision Warning
Rear Cross-Traffic Collision Warning may not operate normally, or may operate unexpectedly if:
Information
For more information on the limitations of the rear corner radar, refer to the "Blind-Spot Collision Warning" section in this chapter.
WARNING
A: Structure
Rear Cross-Traffic Collision Warning may be limited when driving near another vehicle or a structure, and it may not detect the vehicle approaching from the left or right. The function may not activate a warning.
Always check your surroundings while backing up.
Rear Cross-Traffic Collision Warning may detect vehicles that are parking or pulling out near your vehicle (e.g. leaving beside your vehicle, parking or pulling out behind your vehicle, approaching your vehicle making a turn). If this occurs, the function may activate a warning even when not needed. Always check your surroundings while backing up.
A: Vehicle
Rear Cross-Traffic Collision Warning may be limited when backing up diagonally, and may not detect any vehicle approaching from the left or right. If this occurs, the function may not activate a warning.
Always check your surroundings while backing up.
Rear Cross-Traffic Collision Warning may be limited when your vehicle is on a uphill or downhill slope, and may not detect any vehicle approaching from the left or right. If this occurs, the function may activate a warning even when not needed. Always check your surroundings while backing up.
A: Structure, B: Wall
Rear Cross-Traffic Collision Warning may detect vehicles passing by in front of you when parking in reverse into a parking space with a wall or structure in the rear or side area. If this occurs, the function may activate a warning.
Always check your surroundings while backing up.
Rear Cross-Traffic Collision Warning may detect vehicles passing by behind you when parking in reverse into a parking space. If this occurs, the function may activate a warning even when not needed. Always check your surroundings while backing up.
WARNING
Hyundai Tucson (NX4) 2022-2023 Owner's Manual: Automatic Climate Control
System
To defog inside windshield
1. Select the desired fan speed.
2. Select the desired temperature.
3. Press the defrost button ().
4. The air conditioning turns on
according to the detected ambient
temperature, the outside (fresh) air
position and higher fan speed are
selected automatica ...
Hyundai Tucson (NX4) 2022-2023 Owner's Manual: System Operation
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the
outside (fresh) air position.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
Heating
1. Set the mode to the position.
2. Set the air intake con ...