Opening or unlocking the liftgate
To open:
1. Make sure you have the smart key in your possession.
2. Press the liftgate open/close button on the vehicle or press and hold the Liftgate Open button 3 on the smart key for more than 1 second. The hazard warning lights blink twice and the liftgate is unlocked.
3. Pull up on the liftgate to open. If your vehicle is equipped with power liftgate, the liftgate is automatically opened.
Remotely starting the vehicle (if equipped)
To start the vehicle remotely:
1. Press the door lock button on the smart key. You must be within about 32 feet (10 m) from the vehicle.
2. Press and hold the Remote Start button 7 on your smart key. You must press the button within 4 seconds from when you have pressed the door lock button. The hazard warning lights blink and the engine starts.
3. To turn off the engine, press the Remote Start button 7 once.
Information
Hyundai Tucson (NX4) 2022-2025 Service Manual: Front Wheel Speed Sensor
- Components
1. Front wheel speed sensor2. Front wheel speed sensor connector
- Removal
• Be careful not to damage the parts located under the vehicle
(floor under cover, fuel filter, fuel tank and canister) when raising
the vehicle using the lift.(Refer to Gen ...
Hyundai Tucson (NX4) 2022-2025 Owner's Manual: Cluster Display Messages
Shift to P (if equipped with smart
key)
This message appears if the Push Button
Start ignition switch is pressed to the
OFF position without the gear in the P
(Park) position.
If this occurs, the Push Button Start
ignition switch goes to the ACC position.
Low key battery (if equipped wi ...