Hyundai Tucson: Hood / Hood Latch Release Handle
1. Hood latch release handle
1.Using a socket, remove the hood release handle (A).
2.To install, reverse removal procedure.
• Make sure the hood latch cable is connected properly.
• Make sure the hood locks / unlocks and opens / closes properly.
Hood Weatherstrip
- Replacement
• Be careful not to scratch the hood weatherstrip.
1.Remove the hood weatherstrip (A).
2.To install, reverse removal procedure.
• Repl ...
Hood Latch
- Component Location
1. Hood Latch Assembly
- Replacement
• Put on gloves to prevent hand injuries
1.Disconnect the negative (-) battery terminal.
2.Remove the ...
Other information:
Hyundai Tucson (NX4) 2022-2025 Service Manual: Ignition Coil
- Description
The ignition coil is mounted on the top side of the cylinder head cover
end. The ignition coil consists of the primary coil that receives
battery power and the secondary coil that generates high voltage.When
the current in the primary coil is cut off by the ignition signal of ...
Hyundai Tucson (NX4) 2022-2025 Service Manual: Ambient Sensor
- Description
The ambient temperature sensor is located at the front of the condenser
and detects ambient air temperature. It is a negative type thermistor;
resistance will increase with lower temperature, and decrease with
higher temperature.The sensor output will be used for discharge
t ...
