Blind-Spot Safety
With the ignition switch ON, go to User Settings > Driver Assistance > Blind- Spot Safety (for cluster type) or Setup > Vehicle > Driver Assistance > Blind-Spot Safety (for infotainment system type) from the Settings menu to select the following:
If you change the setting from Off to Active Assist or Warning Only, the warning lights on the side view mirrors blink for three seconds.
In addition, if the engine is turned on when the function is set to Active Assist or Warning Only, the warning lights on the side view mirrors blink for three seconds.
When the engine is restarted with the function off, the "Blind-Spot Safety is Off" may appear on the instrument cluster.
WARNING
If Warning Only or Off is selected, the function does NOT brake your vehicle to help avoid a collision.
Information
When the engine is restarted, Blind-Spot Collision-Avoidance Assist maintains its last setting.
Information
You can change the Warning Timing and Warning Volume settings or select Driving Safety Priority for Blind-Spot Collision-Avoidance Assist from the Settings menu. For more information, refer to the "Driver Assistance System Settings" section in this chapter.
Hyundai Tucson (NX4) 2022-2025 Owner's Manual: Steering Wheel Heater
When the ignition switch is in the ON
position or when the engine is running,
press the steering wheel heater button to
warm the steering wheel.
The indicator on the button illuminates.
To turn the steering wheel heater off,
press the button again. The indicator on
the button turns off ...
Hyundai Tucson (NX4) 2022-2025 Owner's Manual: Rear Cross-Traffic Collision
Warning Malfunction and
Limitations
Rear Cross-Traffic Collision Warning
malfunction
When the Rear Cross-Traffic Collision
Warning is not working properly, the
"Check Rear Cross-Traffic Safety system"
warning message may appear, and the
warning
light may illuminate on the
instrument cluster. Have the vehicle
inspec ...