Hyundai Tucson: Exterior Lights / Turn Signals and Lane Change Signals

To signal a turn, push down on the lever for a left turn or up for a right turn in position A .

If an indicator stays on and does not flash or if it flashes abnormally, one of the turn signal bulbs may be burned out and require replacement. Contact an authorized HYNDAI dealer.

One touch turn signal

To use One Touch Turn Signal, push the turn signal lever up or down to position B and then release it.

The lane change signals blinks 3, 5 or 7 times.\

You can enable the One Touch Turn Signal function or choose the number of blinking from the Settings menu in the instrument cluster or infotainment system.

Select:

• User Settings > Lights > One Touch Turn Signal > Off/3 flashes/5 flashes/7 flashes (for cluster type)
• Setup > Vehicle > Lights > One Touch Turn Signal > 3 flashes/5 flashes/7 flashes/Off (for infotainment system type)

Information

• For more information on the cluster type Settings menu, refer to the “Cluster Display” section In Chapter 4.
• The infotainment system may change after software updates. For more information, refer to the user’s manual provided in the infotainment system and the quick reference guide.

Battery Saver Function

To prevent the battery from being discharging, the system automatically turns off the parking lights when the driver turns the vehicle off and opens the driver’s door.

To keep the lights on when the vehicle is turned off:

(1) Open the driver’s door.

(2) Turn the parking lights OFF and ON again using the headlight switch.

Headlight delay function

If you place the ignition switch to the ACC or OFF position with the headlights ON, the headlights (and/or parking lights) remain on for about 5 minutes. If the driver’s door is opened and closed, the headlights are turned off after 15 seconds. Also, with the vehicle off if the driver’s door is opened and closed, the headlights (and/or parking lights) are turned off after 15 seconds.

The headlights (and/or parking lights) can be turned off by pressing the lock button on the remote key or smart key twice or turning the headlight switch to the OFF or AUTO position.

You can enable the headlight delay function from the Settings menu in the instrument cluster or infotainment system.

Select: