Hyundai Tucson: Smart Key / Starting the vehicle
Some models are equipped with a Button Start ignition switch instead of a key cylinder. You can leave your smart key in your pocket or purse when you start your vehicle.
For more information, refer to the “Button Start Ignition Switch” section in Chapter 6.
Information
If the smart key is not moved for some time, the detection function for smart key operation will pause. Lift the smart key to activate the detection again.
NOTICE
To prevent damaging the smart key:
- Keep the smart key in a cool, dry place to avoid damage or malfunction. Exposure to moisture or high temperature may cause the internal circuit of the smart key to malfunction. This may not be covered under warranty.
- Avoid dropping or throwing the smart key.
- Protect the smart key from extreme temperatures.
Remotely moving vehicle forward or
backward. Using panic alarm
Remotely moving vehicle forward or
backward (if equipped)
Some models are equipped with the
Remote Smart Parking Assist feature.
With the smart key, the vehicle can be
moved forward or backwa ...
Using the mechanical key. Key cylinder (Driver door). Loss of a smart key
Using the mechanical key
If the smart key does not operate
normally, you can lock or unlock the
driver’s door by using the mechanical
key.
To remove the mechanical key from the
smart key:
...
Other information:
Hyundai Tucson (NX4) 2022-2025 Service Manual: Description and Operation
- Warning Lamp Activation
Warning Lamp Behavior after Ignition On
As soon as the operating voltage is applied to the SRSCM ignition input,
the SRSCM activates the warning lamp for a LED lamp check.The lamp
shall turn on for 6 seconds during the initialization phase and be
turned off afterw ...
Hyundai Tucson (NX4) 2022-2025 Service Manual: Cruise Control (CC) Switch
- Components
1. Remote control switch (Audio swtich)2. Remote control switch (Cruise control switch)
- Circuit Diagram
Trip+SCC+MSLA+LFA
- Inspection
1.Check for resistance between terminals in right switch position.
[Trip/Cruise]
SwitchConnector terminalResistance (± 3%)
...
