Hyundai Tucson: Power Liftgate / Setting the Power Liftgate
To use each feature, you must select the opening speed or opening height from the Settings menu. Deselect the settings when you do not want to use the feature.
Power liftgate opening speed
To adjust the power liftgate speed, select:
- User Settings > Door/Liftgate > Power liftgate Opening Speed > Fast/ Slow (for cluster type)
- Setup > Vehicle > Door/ Liftgate > Power liftgate Opening Speed > Fast/ Slow (for infotainment system type)
The default setting is Fast.
Power liftgate opening height
To adjust the power liftgate opening height, select:
- User Settings > Door/ Liftgate > Power liftgate Opening Height > Full Open/Level 3/Level 2/Level 1/User Height Setting (for cluster type)
- Setup > Vehicle > Door/ Liftgate > Power liftgate Opening Height > Full Open/Level 3/Level 2/Level 1/User Height Setting
Information
- For more information on the cluster type Settings menu, refer to the “Cluster Display” section In Chapter 4.
- The infotainment system may change after software updates. For more information, refer to the user’s manual provided in the infotainment system and the quick reference guide.
User height setting
1. Position the liftgate manually to the height you prefer.
2. Press the power liftgate open/close button located inside the liftgate for more than 3 seconds.
If User Height Setting is selected for the power liftgate opening height, the power liftgate will automatically open to the height manually set by you.
Information
- If the power liftgate opening height has not been manually set, the power liftgate will fully open when ‘User Height Setting’ from the infotainment system is selected.
- If one of the height setting (Full Open/ Level 3/Level 2/Level 1) is selected from the settings menu in the infotainment system, and then User Height Setting is selected, the liftgate opens to the height manually set by you.
- The power liftgate opening speed and opening height settings change according to the linked User Profile. If the User Profile is changed, power liftgate opening speed and opening height settings will change accordingly.
Automatic Reversal
During power liftgate operation if the
power liftgate senses any obstacle,
the liftgate stops or fully opens. The
automatic reverse feature may not
operate properly, or it may operate
unexpe ...
Resetting the Power Liftgate
To reset the Power Lifgate:
1. With the engine off or running, put the
gear in P (Park).
2. Press the power liftgate open/close
inner button A and outer button B
simultaneously until a chime ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Securing a Child Restraint System
seat with Tether Anchor system
First secure the child restraint with
the LATCH lower anchors or the seat
belt. If the child restraint manufacturer
recommends that the top tether strap
be attached, attach and tighten the
top tether strap to the top tether strap
anchor.
Tether anchors are located on the rear of
the ...
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Downhill Brake Control (DBC)
indicator light
This indicator light illuminates:
When the ignition switch is in the ON
position. The downhill brake control
indicator light illuminates for about 3
seconds and then goes off.
When you activate the system by
pressing the DBC button.
This indicator light blinks:
When Downhill ...
