Hyundai Tucson: Power Liftgate / Resetting the Power Liftgate
.png)
To reset the Power Lifgate:
1. With the engine off or running, put the gear in P (Park).
2. Press the power liftgate open/close inner button A and outer button B simultaneously until a chime sounds.
3. Slowly close the liftgate manually.
4. Press the power liftgate open/close outer button. The power liftgate opens with a chime sound. Wait until the liftgate fully opens to complete resetting. If the liftgate stops before it is fully open, resetting cannot be completed.
Information
- If the power liftgate is not reset after the vehicle battery is disconnected or discharged, or the power liftgate fuse is blown, the power liftgate may not operate normally.
- If the power liftgate does not operate properly after the above procedure, have the system inspected by an authorized HYUNDAI dealer.
Setting the Power Liftgate
To use each feature, you must select the
opening speed or opening height from
the Settings menu. Deselect the settings
when you do not want to use the feature.
Power liftgate opening speed
To ...
Emergency Liftgate Safety
Release
To unlock and open the liftgate manually
from inside the cargo area, perform the
following:
1. Insert a long, flat object, such as a key
into the opening at the bottom of the
liftgate.
2. ...
Other information:
Hyundai Tucson (NX4) 2022-2025 Owner's Manual: Reverse Parking Collision-
Avoidance Assist Settings
With the ignition switch ON, go to User
Settings > Driver Assistance > Parking
Safety (for cluster type) or Setup >
Vehicle > Driver Assistance > Parking
Safety (for infotainment system type)
from the Settings menu to select the
following:
If Rear Active Assist is se ...
Hyundai Tucson (NX4) 2022-2025 Service Manual: Roof Side Molding
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
1.Using a screwdriver or remover, remove the roof side molding (A).
2.To install, ...
