Hyundai Tucson: Safe Exit Warning(Sew) / Safe Exit Warning Settings
Safety Exit Warning
.png)
With the ignition switch ON, go to User Settings > Driver Assistance > Blind- Spot Safety > Safe Exit Assist (for cluster type) or Setup > Vehicle > Driver Assistance > Blind-Spot Safety > Safe Exit Assist (for infotainment system type) to turn this function on and off.
Information
When the engine is restarted, Safe Exit Warning maintains the last setting.
Information
You can change the Warning Volume settings or select Driving Safety Priority for Safe Exit Warning from the Settings menu. For more information, refer to the "Driver Assistance System Settings" section in this chapter.
Safe Exit Warning(Sew)
Safe Exit Warning uses the rear
corner radars to help detect a vehicle
approaching the rear of your vehicle,
after the vehicle is stopped and a
passenger opens a door.
If Safe Exit Warning ...
Safe Exit Warning Operation
Collision warning when exiting your
vehicle
When an approaching vehicle from
the rear is detected while a door is
being opened, the warning light on the
side view mirror may blink, a warn ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Rear Door Belt Outside Weatherstrip
- Replacement
1.Pull down the rear door window glass to the lowest level by pressing the power window glass switch.
2.Remove the rear door belt outside weatherstrip (A).
3.To install, reverse removal procedure.
• Replace any damaged clips (or pin-type retainers).
...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Cowl Side Trim
- Component Location
1. Cwol side trim
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
• Take care ...
