Hyundai Tucson (NX4) 2022-2026 Owner's Manual / Driver Assistance System / Reverse Parking Collision-Avoidance Assist (PCA)

Hyundai Tucson: Driver Assistance System / Reverse Parking Collision-Avoidance Assist (PCA)

Reverse Parking Collision-Avoidance Assist uses the wide-rear view camera and rear ultrasonic sensors to help detect pedestrians or objects when backing up. The function may warn you or assist you with braking to help reduce the possibility of a collision when backing up.

Information

Refer to the "Driver Assistance Sensors" section in this chapter for the location and the general precautions of wide-rear view camera and rear ultrasonic sensors.

Parking Distance Warning Malfunction and Limitations

Parking Distance Warning malfunction After starting the engine, a beep sounds when the gear is shifted to R (Reverse) to indicate Parking Distance Warning is operating normally. If one or mo ...

Reverse Parking Collision- Avoidance Assist Settings

With the ignition switch ON, go to User Settings > Driver Assistance > Parking Safety (for cluster type) or Setup > Vehicle > Driver Assistance > Parking Safety (for infotainm ...

Other information:

Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Calibrating the Battery Sensor
If the AGM battery is reconnected or replaced, the ISG system does not operate immediately. If you want to use the system, the battery sensor needs to be calibrated following the procedure. 1. Turn off the engine. 2. Disconnect all electronic devices that were additionally installed afte ...

Hyundai Tucson (NX4) 2022-2026 Service Manual: Front Pillar Trim
- Component Location 1. Front pillar trim - Replacement • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Put on gloves to prevent hand injuries. • Take ca ...