1.Place the car on a flat surface and check whether the body and trunk lid are well-aligned.
2.After loosening the liftgate hinge (A) mounting bolt, adjust the liftgate by moving it up and down or from side to side.
3.Adjust the gap between the liftgate and body by turning the liftgate overslam bumpers (B).
4.After loosening the liftgate striker (C) mounting bolts, adjust the striker by moving it back and forth or from side to side and then tighten the mounting bolts.
5.Make sure the liftgate opens or closes properly.

Liftgate
Liftgate AssemblyHyundai Tucson (NX4) 2022-2026 Service Manual: Cylinder Head
- Removal
• Be careful not to damage the parts located under the vehicle
(floor under cover, fuel filter, fuel tank and canister) when raising
the vehicle using the lift.(Refer to General Information - "Lift and
Support Points")
• In case of rem ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Front Lower Arm G Bushing
- Replacement
Steel lower arm
• Replace the lower arm G bushing if it only has a crack, noise
from bushing without cracks can be improved by applying silicone oil.
1.Replace the lower arm G bushing by using the SST (09545-AL100).
• Refer to th ...