Hyundai Tucson: Driver Assistance System / Remote Smart Parking Assist (RSPA)
Remote Smart Parking Assist uses the ultrasonic sensors for the front, front side, rear side, and rear of your vehicle to enter and exit parking spaces remotely from outside your vehicle.
.png)
- The Remote Operation function helps you move the vehicle forward or backward from outside the vehicle using the smart key.
- When Remote Smart Parking Assist operates, Surround View Monitor and Parking Distance Warning also operates. For more information, refer to the "Surround View Monitor (SVM) and "Parking Distance Warning (PDW)" sections in this chapter.
Information
Refer to the "Driver Assistance Sensors" section in this chapter for the location and the general precautions of front ultrasonic sensors, front side ultrasonic sensors, rear ultrasonic sensors, and rear side ultrasonic sensors.
Information
You can change the Warning Volume settings for Remote Smart Parking Assist from the Settings menu. For more information, refer to the "Driver Assistance System Settings" section in this chapter.
Reverse Parking Collision-
Avoidance Assist Malfunction
and Limitations
Reverse Parking Collision-
Avoidance Assist malfunction
When Reverse Parking Collision-
Avoidance Assist or other related
functions are not working properly,
the "Check Parking Safety syste ...
Remote Smart Parking Assist Operation
Remote Smart Parking Assist button
Remote Operation
Operating order
1. Getting ready to remotely move forward
and backward
There are two ways to operate the
Remote Operation function.
Met ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Lane Keeping Assist Settings
Lane Safety
With the ignition switch ON, go to
User Settings > Driver Assistance >
Lane Safety (for cluster type) or Setup
> Vehicle > Driver Assistance > Lane
Safety (for infotainment system type)
from the Settings menu to select the
following:
If Assist is selecte ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Description and Operation
- Warning Lamp Activation
Warning Lamp Behavior after Ignition On
As soon as the operating voltage is applied to the SRSCM ignition input,
the SRSCM activates the warning lamp for a LED lamp check.The lamp
shall turn on for 6 seconds during the initialization phase and be
turned off afterw ...
