Hyundai Tucson: Remote Smart Parking Assist (RSPA) / Remote Smart Parking Assist Operation
Remote Smart Parking Assist button
.png)
Remote Operation
Operating order
1. Getting ready to remotely move forward and backward
There are two ways to operate the Remote Operation function.
.png)
Method 1: Using the function with engine off.
(1) Within a certain range from your
vehicle press the door lock (.png)
)
button on the smart key and lock
all doors.
(2) Press and hold the Remote Start
(.png)
) button within 4 seconds until
the engine starts.
Remote Smart Parking Assist (RSPA)
Remote Smart Parking Assist uses the
ultrasonic sensors for the front, front
side, rear side, and rear of your vehicle to
enter and exit parking spaces remotely
from outside your vehicle.
...
Remote Smart Parking Assist
Malfunction and Limitations
Remote Smart Parking Assist
malfunction
Remote Smart Parking Assist check
When Remote Smart Parking Assist is
not working properly, the "Check Parking
Assist" warning message may appear
on ...
Other information:
Hyundai Tucson (NX4) 2022-2025 Owner's Manual: If the Engine Will Not Start
• Be sure to shift the gear to N (Neutral)
or P (Park). The engine starts only
when the gear is in N (Neutral) or P
(Park).
• Turn on the interior light. If the light
dims or goes out when you operate
the starter, the battery is drained.
Refer to the instructions in “Jum ...
Hyundai Tucson (NX4) 2022-2025 Service Manual: Description and Operation
- Description
Surround View Monitor (SVM) is the system that allows video monitoring
of 360 degrees around the vehicle. The system includes 4 ultra optical
camera mounted around the vehicle (front, both sides, rear).The video
from these cameras are applied with distortion compensation, time ...
