Hyundai Tucson: Liftgate / Liftgate Lift
• Wear gloves to protect hands from injury.
• Take care not to scratch the liftgate and body surface.
• When removing and installing the liftgate, an assistant is needed.
1.Disconnect the negative (-) battery terminal.
2.Remove the luggage side trim.(Refer to Trunk Trim - "Luggage Side Trim")
3.Disconnect the liftgate lifter connector (A).
4.Using a screwdriver, lift up slightly the socket clips (A) of both ends on the lifter (B), and then remove the lifter from the bracket.
5.Push the socket of the lifter into the bracket for installation.
• Make sure the liftgate locks and opens properly and locks securely.
• Make sure the connectors are connected in properly.
• Make sure the liftgate locks / unlocks and opens / closes properly.
Liftgate Latch
- Component Location
1 . Liftgate latch assembly
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to preve ...
Liftgate Weatherstrip
- Replacement
• Do not apply sealant to the body.
1.Remove the liftgate weatherstrip (A).
2.To install, reverse removal procedure.
• When installing ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Horn
Components and Components Location
- Component Location
1. Horn switch2. Horn relay 3. Horn (Low pitch)4. Horn (High pitch)5. Clock spring
Repair procedures
- Removal
1.Remove the front bumper assembly.(Refer to Body - "Front Bumper Assembly")
2.Remove the bolts and disconnect the hor ...
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Cargo Net Holder
To keep items from shifting in the cargo
area, use the 4 holders located in the
cargo area side trim to attach the cargo
net.
Make sure the cargo net is securely
attached to the holders in the cargo
board.
WARNING
Avoid eye injury. Do not overstretch the
cargo net. Always keep your ...
