Hyundai Tucson: Rear Wiper/Washer / Rear Washer Motor
1.With the washer motor connected to the reservoir tank, fill the reservoir tank with water.
2.Connect positive (+) and negative (-) battery cables to terminals 3 and 1 respectively to see that the washer motor runs and water is pumped.
3.Check that the motor operates normally.Replace the motor if it operates abnormally.
| No | Description |
| 1 | Ground |
| 2 | Windshield washer (+) |
| 3 | Rear washer (+) |
Rear Washer Switch
- Removal
1.Disconnect the negative (-) battery terminal.
2.Remove the clock spring.(Refer to Restraint - "Driver Airbag(DAB) and Clock Spring")
3.Disconnect multifunction switch assembly conne ...
Rear Wiper Blabe
- Removal
• Provides a service position for blade removal with hidden rear wiper.
• The position of the wiper blade service position operates front and rear.
1.After st ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Specification
- Specification
ItemSpecification
Rated voltageDC 12V
Operating voltageDC 9.0 - 16.0V
Operating temperature-86 to 167°F (-30 to 75°C)
Dark currentMAX 1mA
Output power5 W
Output frequency120 ± 7.7 kHz
...
Hyundai Tucson (NX4) 2022-2026 Service Manual: ETC (Electronic Throttle control) System
- Description
The Electronic Throttle Control (ETC) System consists of a throttle
body with an integrated control motor and throttle position sensor
(TPS). Instead of the traditional throttle cable, an Accelerator
Position Sensor (APS) is used to receive driver input. The ECM uses the
APS ...
