Hyundai Tucson: Floor Console / Console Armrest
1. Console armrest
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
• Take care not to bend or scratch the trim and panels.
1.Remove the rear console cover.(Refer to Floor Console - "Rear Console Cover")
2.Loosen the mounting screws, remove the rear console duct (A).
3.Loosen the mounting screws, remove the rear console duct (A).
4.Loosen the mounting screws, remove the console armrest (A).
5.To install, reverse removal procedure.
• Replace any damaged clips (or pin-type retainers).
Rear Console Cover
- Component Location
1. Rear console cover
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent da ...
Crash Pad
...
Other information:
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Side airbags
The side airbags are designed to deploy
during certain side impact collisions,
depending on the crash severity.
The side airbags on both sides of the
vehicle are designed to deploy when a
rollover is detected by a rollover sensor.
The side airbags are not designed to
deploy in all si ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Special Service Tools
- Special Service Tools
Tool Name / NumberIllustrationDescription
LKA Compensator(09890-3V100)
Used for compensating front view camera unit
Vertical measuring instrument(09964-C1200)
Used to measure left/right tilts when automatic tolerance compensation for front camera is performed. Use togeth ...
