Hyundai Tucson: Rear Seat / Rear Seat Cushion Cover

- Component Location

1. Rear seat cushion cover [LH]
2. Rear seat cushion cover [RH]

• Put on gloves to prevent hand injuries.

• Take care not to bend or scratch the rear seat assembly.

1.Remove the rear seat assembly [LH].(Refer to Rear Seat - "Rear Seat Assembly")

2.Remove the rear back hinge cover [LH] (A).

3.Loosen the mounting screw, remove the rear seat slide knob (A).

4.Loosen the mounting screw, remove the rear seat recliner (A).

5.Loosen the mounting screw, remove the rear seat shield outer cover (A).

6.Loosen the mounting screw, remove the rear back hinge cover [RH] (A).

7.Disconnect the seat heater connector (A).

8.Separate the rear seat cushion cover protector (A) and then remove the rear seat cushion cover.

9.Remove the rear seat cushion cover (A) from the rear seat cushion frame.

10.After removing the velcro tape (A) on the rear of seat cushion and remove the rear seat cushion cover (B).

• Be careful not to deviate from the pads, insert wires, and aplix.

11.To install, reverse the removal procedure.

• Make sure that the connectors are connected completely.

1.Remove the rear seat assembly [RH].(Refer to Rear Seat - "Rear Seat Assembly")

2.Remove the rear back hinge cover [RH] (A).

3.Loosen the mounting screw, remove the rear seat slide knob (A).

4.Loosen the mounting screw, remove the rear seat recliner (A).

5.Disconnect the seat heater connector (A).

6.Separate the rear seat cushion cover protector (A) and then remove the rear seat cushion cover.

7.Remove the rear seat cushion cover (A) from the rear seat cushion frame.

8.After removing the velcro tape (A) on the rear of seat cushion and remove the rear seat cushion cover (B).

• Be careful not to deviate from the pads, insert wires, and aplix.

9.To install, reverse the removal procedure.

• Make sure that the connectors are connected completely.