Hyundai Tucson: Body Electrical System / Immobilizer System

Rear Occupant Alert Sensor

- Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the cover (A) by using a flat-tip screwdriver. 3.Disconnect the connector (A) and then remove the occupant alert sensor. ...

Description and Operation

- Description The immobilizer system will disable the vehicle unless the proper ignition key is used, in addition to the currently available anti-theft systems such as car alarms, the immobiliz ...

Other information:

Hyundai Tucson (NX4) 2022-2025 Owner's Manual: License Plate Light Replacement
License plate light (Bulb type) 1. Using a flat-blade screwdriver, gently pry the lens cover from the lamp housing. 2. Remove the bulb by pulling it straight out. 3. Install a new bulb. 4. Reinstall in the reverse order. License plate light (LED type) If the LED light does not operate, ...

Hyundai Tucson (NX4) 2022-2025 Service Manual: Side Sill Molding
- Replacement     • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Put on gloves to prevent hand injuries. 1.Loosen the mounting screws, remove the side seal molding (A). 2.To install, rev ...