Hyundai Tucson: Lighting System / High Mounted Stop Lamp
1.Disconnect the negative (-) battery terminal.
2.Remove the rear spoiler.(Refer to Body - "Rear Spoiler")
3.Remove the high mounted stop lamp assembly (A) after loosening screws (4EA).
1.Install the high mounted stop lamp.
2.Install the rear spoiler.
3.Connect the negative (-) battery terminal.
License Lamps
- Removal
1.Disconnct the negative (-) battery terminal.
2.Using a flat-tip screwdriver and remove the license lamps.
- Installation
1.Install the bulb.
2. Install the license lamp lens. ...
Luggage Room Lamp
- Removal
1.Disconnect the negative (-) battery terminal.
2.Using a flat-tip screwdriver and remove the luggage room lamp (A).
3.Disconnect the luggage room lamp connector (A).
- Installat ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Auto Defogging System
on Models with Automatic
Temperature Control
Auto defogging reduces the likelihood of
fogging up the inside of the windshield
by sensing moisture on the inside of the
windshield.
The auto defogging system operates
when the heater or air conditioning is on.
Information
The Auto Defogging system may not
operate normally, when the ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Crankshaft Position Sensor (CKPS)
- Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and
is one of the most important sensors of the engine control system. If
there is no CKPS signal input, fuel is not supplied.That is, vehicle
can't run without CKPS signal. This sensor is installed on the cylin ...
