Hyundai Tucson Owners & Service Manuals

Hyundai Tucson: Front Seat / Front Seat Cushion Cover

- Component Location

1. Front seat cushion cover


- Replacement

   

• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

• Put on gloves to prevent hand injuries.

   

• Take care not to bend or scratch the front seat.

1.Remove the front seat shield outer cover.(Refer to Front Seat - "Front Seat Outer Cover")

2.Remove the front seat shield inner cover.(Refer to Front Seat - "Front Seat Inner Cover")

3.Remove the front seat lower protector (A).

4.Disconnect the connectors (A).

5.Remove the protector (A) from the front seat cushion frame.[Upper]

[Lower]

[LH]

[RH]

6.After removing the Velcro tape (A) inside the front seat cushion cover, remove the seat cushion cover (B).

7.To install, reverse removal procedure.

   

• Make sure that the connectors are connected completely

• Replace any damaged clips (or pin-type retainers).

    Front Seat Back Cover
    - Component Location 1. Front seat back cover - Replacement     • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent ...

    Rear Seat
    ...

    Other information:

    Hyundai Tucson (NX4) 2022-2026 Service Manual: 46 Clutch Control Solenoid Valve (46/C_VFS)
    - Description • 46 Clutch control solenoid valve is a Variable Force Solenoid (VFS) type. • When TCM supplies variable current to solenoid valve, hydraulic pressure of 46 clutch is controlled directly by solenoid valve. - Components Location 1. 28 Brake control solenoid valve ...

    Hyundai Tucson (NX4) 2022-2026 Service Manual: Warning Indicator
    - Components 1. BCW Indicator2. SVM Camera - Inspection 1.Disconnect the negative (-) battery terminal. 2.Remove the front door trim.(Refer to Body - "Front door trim") 3.Disconnect the power door mirror connector from the harness BCW indicator - Removal 1.Disconnect the n ...

    © 2023-2026 Copyright www.htucson4.com