Hyundai Tucson: Front Seat Belt / Front Seat Belt Buckle
1. Front seat belt buckle
1.Remove the front seat assembly.(Refer to Front Seat - "Front Seat Assembly")
2.After loosening the mounting bolt, then remove the front seat belt buckle (A).
Tightening torque :39.2 - 53.9 N.m (4.0 - 5.5 kgf.m , 28.9 - 39.8 lb-ft)
3.To install, reverse removal procedure.
• Make sure the connector is plugged in properly.
Height Adjust
- Component Location
1. Height adjust
- Replacement
1.Remove the front seat belt upper anchor.(Refer to Front Seat Belt - "Front Seat Belt Pretensioner")
2.After loosening the mounting ...
Rear Seat Belt
...
Other information:
Hyundai Tucson (NX4) 2022-2025 Service Manual: C Pillar Garnish
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
1.Using a screwdriver or remover, remove the C pillar garnish (A).
2.To install, ...
Hyundai Tucson (NX4) 2022-2025 Service Manual: Engine Cover
- Removal and Installation
1.Remove the engine cover (A).
• Remove the engine cover on room temperature.
• Do not disengage both front and rear mounting point at the same time.
2.Install in the reverse order of removal. ...
