Forward Safety
.png)
With the ignition switch ON, go to User Settings > Driver Assistance > Forward Safety (for cluster type) or Setup > Vehicle > Driver Assistance > Forward Safety (for infotainment system type) from the Settings menu to select the following:
warning light illuminates on the
instrument cluster.You can check whether Forward Collision-Avoidance Assist is on or off from the Settings menu. If the warning light remains on when Forward Collision-Avoidance Assist is on, have the vehicle inspected by an authorized HYUNDAI dealer.
WARNING
Each time the engine is restarted, Forward Collision-Avoidance Assist turns on.
If Warning Only or Off is selected after the engine is restarted, the function does NOT brake your vehicle to help avoid a collision.
Information
The Forward Safety settings are for Forward Collision-Avoidance Assist’s basic function and Junction Turning function.
Information
You can change the Warning Timing and Warning Volume settings or select Driving Safety Priority for Forward Collision-Avoidance Assist from the Settings menu. For more information, refer to the "Driver Assistance System Settings" section in this chapter.
Forward Collision–Avoidance Assist (FCA) (Sensor fusion)
Forward Collision-Avoidance
Assist OperationHyundai Tucson (NX4) 2022-2026 Owner's Manual: Care of Seat Belts
Seat belt systems should never be
disassembled or modified.
Periodic inspection
All seat belts should be inspected
periodically for wear or damage of any
kind. Any damaged parts should be
replaced as soon as possible.
Keep belts clean and dry
Seat belts should be kept clean and
dry. If ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Front Pillar Trim
- Component Location
1. Front pillar trim
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
• Take ca ...