Hyundai Tucson: Starting System / Description and Operation
- Description
The starting system includes the battery, starter, solenoid switch,
ignition switch, ignition lock switch, connection wires and the battery
cable.When the ignition key is turned to the start position, current
flows and energizes the starter motor's solenoid coil.The solenoid
plunger and clutch shift lever are activated, and the clutch pinion
engages the ring gear.The contacts close and the starter motor cranks.
In order to prevent damage caused by excessive rotation of the starter
armature when the engine starts, the clutch pinion gear overruns.
- Troubleshooting
• The battery must be in good condition and fully charged for this troubleshooting.
Trouble symptomProbable causeRemedy
Engine will not crankBattery c ...
Other information:
Hyundai Tucson (NX4) 2022-2025 Service Manual: Ultrasonic Sensor
- Schematic Diagrams
- Removal
1.Disconnect the negative (-) battery terminal.
2.Remove the front/rear bumper assembly.(Refer to Body - "Front Bumper Assembly")(Refer to Body - "Rear Bumper Cover")
3.Disconnect the connector from the parking distance warning sensor.
4.Pull out the s ...
Hyundai Tucson (NX4) 2022-2025 Service Manual: Description and Operation
- Description of ESP
Electronic Stability Control (ESC) recognizes critical driving
conditions, such as panic reactions in dangerous situations, and
stabilizes the vehicle by individual wheel braking and engine control
input.ESC adds an additional function known as Active Yaw Control (AYC) ...