.png)
1 Driver’s door power window switch
2 Front passenger’s door power window
switch
3 Rear door (left) power window switch
4 Rear door (right) power window switch
5 Window opening and closing
6 Automatic power window
(if equipped)
7 Power window lock button
The ignition switch must be in the ON position to be able to raise or lower the windows. Each door has a Power Window switch to control the door’s window. The driver has a Power Window Lock button that can block the operation of rear passenger windows. The power windows will operate for about 3 minutes after the ignition is turned OFF or if the ignition is placed in the ACC position, as long as the front doors remain closed.
If the front doors are opened, the battery power is turned OFF and the Power Windows do not operate.
Window opening and closing
.png)
To open:
Press the window switch down to the first detent position
Side View MirrorsHyundai Tucson (NX4) 2022-2026 Owner's Manual: Blind-Spot Collision Warning (BCW)
Blind-Spot Collision Warning uses
the rear corner radar to help detect
approaching vehicles in the driver’s blind
spot areas and warn you of a possible
collision with a warning message and
audible warning.
Blind-Spot Collision Warning helps
detect and warns you that a vehicle is in ...
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Idle Stop and Go (ISG) System
Idle Stop and Go helps reduce fuel
consumption by automatically shutting
down the engine, when the vehicle is at
a standstill (i.e. red stop light, stop sign,
and traffic jam).
ISG system is always active, when the
engine is running.
Information
When the engine is automatically started ...