Hyundai Tucson: Push Button Start Ignition Switch / Turning Off the Engine
1. Stop the vehicle and depress the brake pedal fully.
2. Make sure the shift lever/button is in P (Park).
3. Press the Push Button Start ignition switch to the OFF position and apply the Electronic Parking Brake (EPB).
4. Take the key with you when you leave the vehicle.
Starting the Engine
WARNING
Always wear appropriate shoes when
operating your vehicle. Unsuitable
shoes such as high heels, ski boots,
sandals, and flip-flops may interfere
with your ability to use the br ...
Remotely Starting the Engine
Type A
Type B
You can start the vehicle using the
Remote Start button on the smart key.
To start the vehicle remotely:
1. Press the door lock button within 32
feet (10 m) from the vehicle. ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Hazard Lamp Switch
- Removal
1.Disconnect the negative (-) battery terminal.
2.Remove the front monitor.(Refer to AVN System - "Front Monitor")
3.Remove the hazard switch (A).
- Installation
1.Install the hazard switch.
2.Install the front monitor.
3.Connect the negative (-) battery terminal. ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: PTG Spindle
- Removal
1.Disconnect the negative (-) battery terminal.
2.Remove the rear pillar trim.(Refer to Body (Interior and Exterior) - Interior Trim - Rear Pillar Trim)
3.Disconnect the PTG spindle connector (A).
4.Using a flat-tip screwdriver, remove the mounting clip (A).
5.Remove the spind ...
