Hyundai Tucson Owners & Service Manuals

Hyundai Tucson: Indicators And Gauges / Troubleshooting

- Troubleshooting

Error ItemFailure SymptomInspection Items Detailed Inspections Relevant Parts/
Components
Screen displayLCD-TFT screen does not turn on
1)
Connector attachments
2)
Components
1)
Check the connector attachments
2)
Check B+, IGN and GND wiring
3)
Check the components
Connectors, wiring, fuses, dashboard
Warning lightAirbag warning lamp malfunction
1)
Connector attachments
2)
C-CAN
3)
Components
1)
Check airbag + signal (connectors)
2)
Check C-CAN (ACU4) signal
3)
Check the FPC attachment inside the dashboard
ACU Connectors, wiring, fuses, dashboard
Mode conversionIntegrated driving mode malfunction
1)
Connector attachments
2)
Switch
3)
Components
1)
Check the switch input (connector)
2)
Check the switch signal input
(disconnection or shorting)
3)
Check conversion with dashboard component
Switch connector, wiring dashboard
Warning SoundNo dashboard alarm
1)
Connector attachments
2)
Car speakers
3)
Components
1)
Check the speaker output connector
2)
Check the car speakers
Speaker connectors, wiring dashboard
Fuel indicatorFaulty fuel gauge indication
1)
Connector attachments
2)
Fuel sender
3)
Components
1)
Check fuel input and GND connectors
(open, short or input resistance values)
2)
Check fuel sender
Fuel sender connector, wiring dashboard

    Indicators And Gauges
    ...

    Instrument Cluster
    - Description Cluster Variant Coding As we have more options (SCC, VDC, EPB, Cubis, MDPS, TPMS, LDWS, ECS 등) in the car, the dashboard now has more information to display depending on the ch ...

    Other information:

    Hyundai Tucson (NX4) 2022-2025 Service Manual: Front Door Outside Handle
    - Components Location 1. Front door outside handle - Replacement     • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Put on gloves to prevent hand injuries. 1.Disconnect the negat ...

    Hyundai Tucson (NX4) 2022-2025 Service Manual: Repair procedures
    - Adjustment 1.After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up and down or from side to side and tighten the bolt. 2.Adjust the hood height by moving the hood overslam bumpers (C) up and down. 3.After loosening the hood latch (D) mounting bolts, adjust the l ...

    © 2023-2025 Copyright www.htucson4.com