The trip computer displays information related to driving.
Information
Some driving information stored in the trip computer resets if the battery is disconnected.
Trip modes
.png)
.png)
.png)
To change the trip mode, toggle the ˄,˅ switch on the steering wheel.
Resetting average fuel economy
To clear the average fuel economy manually, press the OK button on the steering wheel for more than 1 second when the Average Fuel Economy appears.
To automatically reset the average
fuel economy, select After vehicle
start or After refueling from the
Settings menu in the instrument
cluster or infotainment system.
- After vehicle start: When the engine
has been OFF for 3 minutes or
longer, the average fuel economy
resets automatically.
- After refueling: The average fuel
economy automatically reset after
adding 1.6 gallons (6 liters) of fuel
or more and after the driving speed
exceeds 1 mph (1 km/h).
Information
If equipped with a 10.25-inch instrument cluster, the fuel economy appears in the center bottom of the cluster.
Drive Info
.png)
Trip distance 1, average fuel economy 2, and instant fuel economy 3 are displayed.
The information is combined for each ignition cycle. However, when the engine has been OFF for 3 minutes or longer the Drive Info screen is reset.
To reset manually, press the OK button on the steering wheel for more than 1 second when "Drive Info" appears.
Since Refueling
.png)
After the vehicle has been refueled, the trip distance 1, average fuel economy 2, and total driving time 3 appear.
To reset manually, press the OK button on the steering wheel for more than 1 second when "Since Refueling" appears.
Accumulated Info
.png)
Accumulated trip distance 1, average fuel economy 2, and instant fuel economy 3 appear.
The information is accumulated starting from the last reset.
To reset manually, press the OK button on the steering wheel for more than 1 second when "Accumulated Info“ appears.
Auto stop
.png)
Displays the elapsed time of engine stop by the Idle Stop and Go system.
For more information, refer to the “Idle Stop and Go (ISG)” section in Chapter 6.
Digital speedometer
.png)
Displays the speed of the vehicle.
User Settings Mode
Trip Computer (Type B)Hyundai Tucson (NX4) 2022-2026 Service Manual: Power Mosfet (Dual)
- Inspection
1.Turn the ignition switch ON.
2.Manually operate the control switch and measure the voltage of the blower motor.
3.Select the control switch to raise the voltage until high speed.
Fan SpeedVoltage (V)
Manual ControlAuto Control
13.83.8 ~ 4.75
255.0 ~ 5.8
36.16.1 ~ 7.0
47. ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Auto Defoging Actuator
- Description
The auto defogging sensor is installed on the front window glass. The
sensor judges and sends signal if moisture occurs to blow out wind for
defogging. The air conditioner control module receives a signal from the
sensor and restrains moisture and eliminates defog by the intak ...