Hyundai Tucson: Smart Cruise Control Operation / To temporarily cancel Smart Cruise Control. To resume Smart Cruise Control
To temporarily cancel Smart Cruise Control
.png)
Press the .png)
button or depress the
brake pedal to temporarily cancel Smart
Cruise Control.
To resume Smart Cruise Control
.png)
Push the +/- switch or
button.
If you push the +/- switch up or down, your vehicle speed is set to the current speed on the instrument cluster.
If you press the
button, your vehicle
speed resumes to the previously set
speed.
Your vehicle speed must be above 20 mph (30 km/h) for the function to resume.
WARNING
Your vehicle speed may rapidly increase
or decrease when you press the
button.
To decrease speed
Push the - switch down and release it
immediately to decrease the cruising
speed by 1 mph (1 km/h).
Push and hold the - switch down to
decrease to the nearest multiple of 5
mph (or ...
To turn off Smart Cruise Control
Press the Driving Assist ()
button to
turn off Smart Cruise Control.
Information
If your vehicle is equipped with Manual
Speed Limit Assist, press and hold the
Driving Assist button to tur ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Automatic Transaxle
- Removal
• Be careful not to damage the parts located under the vehicle
(floor under cover, fuel filter, fuel tank and canister) when raising
the vehicle using the lift.(Refer to General Information - "Lift and
Support Points")
1.Turn ignition switch OFF and disconn ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Joint Assembly (Wheel side)
- Removal
The type can replace the wheel side joint boot
1.Remove the front drive shaft.(Refer to Driveshaft Assembly - "Front Driveshaft")
2.Remove the trans axle side joint.(Refer to Driveshaft Assembly - "Transaxle Joint")
3.Remove the dynamic damper.(Refer to Driveshaft Assembly - "Dynam ...
