Hyundai Tucson: Driver Assistance System / Surround View Monitor (SVM)
.png)
Surround View Monitor uses the widefront view camera, wide-side view camera, and wide-rear view camera to display images around your vehicle through the infotainment system screen when parking.
- Parking Assist View provides various view modes of your vehicle's surroundings.
Information
Refer to the "Driver Assistance Sensors" section in this chapter for the location and the general precautions of widefront view camera, wide-side view camera, and wide-rear view camera.
- Surround View Monitor Settings
- Surround View Monitor Operation
- Surround View Monitor Malfunction and Limitations
Rear View Monitor Malfunction
and Limitations
Rear View Monitor malfunction
When Rear View Monitor is not working
properly, or the screen flickers, or the
camera image does not display normally,
have the vehicle inspected by an
authorize ...
Surround View Monitor Settings
Camera settings
To change the settings of Surround View
Monitor's Display Contents or Display
Settings, press the setup icon ()
on
the screen while Rear View Monitor is
operating, or go t ...
Other information:
Hyundai Tucson (NX4) 2022-2025 Service Manual: Steering Column and Shaft
- Replacement
1.Turn the steering wheel so that the front wheels are placed in the straight ahead position.
2.Turn the ignition switch OFF and disconnect the battery negative (-) cable.
3.Remove the driver airbag (DAB).(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
4.R ...
Hyundai Tucson (NX4) 2022-2025 Owner's Manual: Hood
Opening the Hood
1. Park the vehicle and apply the parking
brake.
2. Pull the release lever to unlatch the
hood. The hood pops open slightly.
3. Go to the front of the vehicle, raise the
hood slightly, push up the secondary
latch 1 inside of the hood center and
lift the hood 2.
4 ...
