Hyundai Tucson Owners & Service Manuals

Hyundai Tucson: Supplemental Restraint System - Airbags / SRS Care

The SRS is virtually maintenance-free and there are no parts you can safely service by yourself. If the SRS airbag warning light does not illuminate when the ignition switch is in the ON position or continuously remains on, have the system immediately inspected by an authorized HYUNDAI dealer.

Any work on the SRS system, such as removing, installing, repairing, or any work on the steering wheel, the front passenger’s panel, front seats, and roof rails should be performed by an authorized HYUNDAI dealer. Improper handling of the SRS system may result in serious personal injury or death.

WARNING

To reduce the risk of serious injury or death:

  • Do not attempt to modify or disconnect the SRS components or wiring, including the addition of any kind of badges to the pad covers or modifications to the body structure.
  • Do not place objects over or near the airbag modules on the steering wheel, instrument panel, and the front passenger’s panel above the glove box.
  • Clean the airbag pad covers with a soft cloth moistened with water. Solvents or cleaners may adversely affect the airbag covers and proper deployment of the system.
  • Replace inflated airbags by an authorized HYUNDAI dealer.
  • If components of the airbag system must be discarded, or if the vehicle must be scrapped, observe safety precautions. Consult an authorized HYUNDAI dealer for the necessary information.
    Airbag non-inflation conditions
    In certain low-speed collisions, the airbags may not deploy. The airbags are designed not to deploy in such cases because they may not provide benefits beyond the protection of the seat belt ...

    Additional Safety Precautions
    Passengers should not move out of or change seats while the vehicle is moving. A passenger who is not wearing a seat belt during a collision or emergency stop can be thrown against the insid ...

    Other information:

    Hyundai Tucson (NX4) 2022-2025 Service Manual: C Pillar Garnish
    - Replacement     • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Put on gloves to prevent hand injuries. 1.Using a screwdriver or remover, remove the C pillar garnish (A). 2.To install, ...

    Hyundai Tucson (NX4) 2022-2025 Service Manual: Radiator
    - Removal and Installation     • Be careful not to damage the parts located under the vehicle (floor under cover, fuel filter, fuel tank and canister) when raising the vehicle using the lift.(Refer to General Information - "Lift and Support Points") 1.Disconnect the batt ...

    © 2023-2025 Copyright www.htucson4.com