Passengers should not move out of or change seats while the vehicle is moving. A passenger who is not wearing a seat belt during a collision or emergency stop can be thrown against the inside of the vehicle, against other occupants, or be ejected from the vehicle.
Do not use any accessories on seat belts. Devices claiming to improve occupant comfort or reposition the seat belt can reduce the protection provided by the seat belt and increase the chance of serious injury in a collision.
Do not modify the front seats. Modification of the front seats may interfere with the operation of the Supplemental Restraint System sensing components or side airbags.
Do not place items under the front seats. Placing items under the front seats may interfere with the operation of the Supplemental Restraint System sensing components and wiring harnesses.
Do not cause impact to the doors. Impact to the doors when the ignition switch is in the ON or START position may cause the airbags to inflate.
Modifications to accommodate disabilities. If you require modification to your vehicle to accommodate a disability, contact the HYUNDAI Customer Connect Center at 800-633- 5151.
Adding equipment to or modifying your airbag equipped vehicle
If you modify your vehicle by changing your vehicle’s frame, bumper system, front end or side sheet metal, or ride height, this may affect the operation of your vehicle’s Supplemental Restraint System.
SRS Care
Airbag Warning LabelsHyundai Tucson (NX4) 2022-2025 Service Manual: Description and Operation
- Description and operation
The System may be limited when • The radar sensor or camera is blocked with a foreign object or debris.
• The camera lens is contaminated due to tinted filmed or coated
windshield, damaged glass, or stuck of foreign matter (sticker, bug,
e ...
Hyundai Tucson (NX4) 2022-2025 Service Manual: Repair procedures
- Removal
1.Disconnect the negative (-) battery terminal.
2.Remove the inside rear view mirror cover (A) and (B).
3.Disconnect the inside rear view mirror connector (A).
4.Loosen the mounted screws and push the ECM mirror base upward to remove the ECM mirror assembly (A).
- Inspection ...