Hyundai Tucson: 4 Wheel Drive (4WD) System / Special Service Tools
| Type | Tools (Number and name) | Illustration | Use |
| [A] | Oil seal installer 09473-D3600 |
| Used for installing the transfer case oil seal (Driveshaft side) (Used with the handle) |
| Handle 09231-H1100 |
| Used for installing the transfer case oil seal (Used with the oil seal installer) |
| Type | Tools (Number and name) | Illustration | Use |
| [B] | Oil seal #1 installer 0K473-P2100 |
| Used for installing the transfer case oil seal #1 (Driveshaft side) (Used with the handle) |
| Oil seal #2 installer 0K473-P2200 |
| Used for installing the transfer case oil seal #2 (Driveshaft side) (Used with the handle) | |
| Oil seal #3 installer 0K473-P2300 |
| Used for installing the transfer case oil seal #3 (Driveshaft side) (Used with the handle) | |
| Oil seal installer 0K473-P2400 |
| Used for installing the transfer case (Transaxle side) (Used with the handle) | |
| Handle 09231-H1100 |
| Used for installing the transfer case oil seal (Used with the oil seal installer) |
Specifications
- Specifications
Tightening Torques
ItemsN.mKgf.mlb-ft
Transfer assembly mounting bolts60.8 - 65.76.2 - 6.744.8 - 48.5
4WD ECM mounting nuts9.8 - 11.81.0 - 1.27.2 - 8.7
Coupling assembly mount ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Variable Intake Solenoid (VIS) Valve
- Description
Variable Intake manifold Solenoid (VIS) valve is installed on the
intake manifold. The VIS valve controls the vacuum modulator which
activates a valve in the intake manifold. The ECM opens or closes this
valve according to engine condition (Refer to below table).
Engine Cond ...
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Windshield Defrosting and Defogging
WARNING
Do not use the defrost-level
position
during the cooling operation in extremely
humid weather. The outer surface of the
windshield may fog and reduce visibility,
causing a collision that results in serious
injury or death.
Set the mode selection button to the
face-level pos ...
