Hyundai Tucson Owners & Service Manuals

Hyundai Tucson: Smart Cruise Control Malfunction and Limitations / Smart Cruise Control disabled

If the front radar is covered or blocked, its detecting performance is reduced, and Smart Cruise Control is temporarily limited or disabled.

The "Smart Cruise Control disabled. Radar blocked" warning message may appear on the instrument cluster.

If Smart Cruise Control does not operate normally after the sensor has been uncovered or unblocked, have the vehicle inspected by an authorized HYUNDAI dealer.

WARNING

  • Smart Cruise Control may not operate properly even if there is no warning message or warning light on the instrument cluster.
  • Smart Cruise Control may not operate properly in open areas where no objects are detected (e.g. empty parking lot) or when the detecting sensors are blocked right after turning on the engine.
    Smart Cruise Control Malfunction and Limitations
    Smart Cruise Control malfunction When Smart Cruise Control is not working properly, the "Check Smart Cruise Control system" warning message may appear, and the warning light may illuminat ...

    Limitations of Smart Cruise Control
    Smart Cruise Control may not operate normally or may operate unexpectedly if: The sensor or the area near the sensor is blocked, covered, or damaged. The temperature near the front view ...

    Other information:

    Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Anti-lock Brake System (ABS) warning light. Electronic Brake Force Distribution (EBD) system warning light
    Anti-lock Brake System (ABS) warning light This warning light illuminates: When the ignition switch is in the ON position. The ABS warning light illuminates for about 3 seconds and then goes off. Whenever there is a malfunction with the ABS. The hydraulic braking system sti ...

    Hyundai Tucson (NX4) 2022-2026 Service Manual: Front Door Trim
    - Components Location 1. Front door trim - Replacement     • When removing with a flat - tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Put on gloves to prevent hand injuries. 1.Disconnect the negative ( ...

    © 2023-2026 Copyright www.htucson4.com